FEATURED PRODUCTS |
 |
MHZ2160BH
SATA |
 |
|

MHZ2 - 160BH
|
MHZ2 - 160BH
SATA
MHZ2080BH • MHZ2120BH • MHZ2160BH
MHZ2200BH • MHZ2250BH • MHZ2320BH
- Ultra-high capacity mobile Hard Disk Drives feature
perpendicular magnetic recording (PMR) technology
- 2.5-inch Serial ATA (SATA) Hard Disk Drives feature up to 320GB of storage
in a slim 9.5mm package
- Industry leading read/write, idle and standby power
consumption
- Exceptionally high quality, reliability and performance
with minimal heat and acoustics
- Ideal for laptops and consumer electronics applications
requiring high speed and high capacity
1 One gigabyte (GB) = one billion bytes; accessible capacity will be less
and
actual capacity depends on the operating environment and formatting.
One megabyte (MB) = 1,000 bytes
One gigabyte (GB) = 1,000 megabytes
One gigabit (Gb) = 1,000 megabits
RPM = Revolutions Per Minute
|
 |
DESCRIPTIONS |
 |
|
Fujitsu raises the bar with the introduction of its next generation 2.5-inch SATA Hard Disk Drives
with up to 160GB per platter using PMR technology. Since laptop and consumer
electronics manufacturers require high capacity
SATA Hard Disk Drives in a slim form factor for
their products, Fujitsu 3rd generation PMR models
are entering the market at an optimal time to
satisfy market demand.
Engineered to deliver high capacity in a small
form factor, the mobile MHZ2 BH series retains
the outstanding level of quality and reliability for
which Fujitsu is renowned. The 5,400 RPM mobile
Hard Disk Drives achieve up to 320GB capacity,
among the highest in the industry with this spindle
speed. Featuring up to 320GB of storage space in a
2.5-inch form factor, with low power consumption,
acoustic noise, and minimal heat emissions, these
SATA Hard Disk Drives are an excellent choice for
today’s ultra-fast, high-capacity laptop computers
and consumer electronics applications.
With the delivery of its next generation,
perpendicular recording SATA Hard Disk Drives,
Fujitsu continues to demonstrate its strong
commitment to technology leadership.
Documents
|
 |
SPECIFICATIONS |
 |
|
| 2.5 Inch,
5,400 RPM Series Hard Disk Drive Specifications |
| Model |
MHZ2080BH |
MHZ2120BH |
MHZ2160BH |
MHZ2200BH |
MHZ2250BH |
MHZ2320BH |
| Storage Capacity (formatted)(1) |
80 GB |
120 GB |
160 GB |
200 GB |
250 GB |
320 GB |
| Bytes/Sector |
512 |
| Seek Time |
Track to track |
1.5 ms typ. |
| Average |
12 ms typ. (Read), 14 ms typ. (Write) |
| Maximum |
22 ms typ. |
| Average Latency |
5.56 ms |
| Rotational Speed |
5,400 RPM |
| Data Transfer to/from Host |
1.5Gb/sec.
or 3.0Gb/sec. |
| Interface |
SATA rev
2.6 |
| Buffer |
8 MB |
| Power Requirements |
Voltage |
5 V ± 5% |
| Spin-up |
1.0 A max |
| Read/Write |
1.9 W
typ. (1.5Gb/sec) or 2.1 W typ. (3.0Gb/sec) |
| Idle(2) |
0.6 W typ. |
| Standby(2) |
0.13 W typ. |
| Sleep(2) |
0.13
W typ. |
| Dimensions |
Height |
9.5
mm (0.37 in.) |
| Width |
70 mm (2.8 in.) |
| Depth |
100 mm (3.9 in.) |
| Weight |
101 g (3.57 oz.) or less |
| Ambient Temperature |
Operating |
5°C to 55°C (41°F to 131°F) |
| Non-operating |
-40°C to 65°C (-40°F to 149°F) |
| Gradient |
20°C (68°F) / H or less |
| Relative Humidity |
Operating |
8% to 90% RH (non-condensing) |
| Non-operating |
5% to 95% RH (non-condensing) |
| Max wet bulb |
29°C (Op.) / 40°C (Non Op.) |
| Vibration |
Operating |
9.8 m/s² (1.0 G) (5 to 500 Hz) |
| Non-operating |
49m/s² (5.0 G) (5 to 500 Hz) |
| Shock |
Operating |
3,185
m/s2 (325 G) 2ms |
| Non-operating |
8,820 m/s² (900 G) 1ms |
| Altitude |
Operating |
-300 to 3,000 m (-1,000 to 10,000 ft.) |
| Non-operating |
-300 to 12,000 m (-1,000 to 40,000 ft.) |
| Acoustics Noise |
HDD Idle |
2.4 bels (typ.) |
| Limited Warranty |
3 years (from date of
purchase) |
2 SATA PHY in slumber mode.
3 A small portion
of buffer memory is used for drive firmware control.
|
 |
WARRANTY |
 |
|
3 years (from date of purchase).
Consult the Limited Warranty Guide or call us toll free at (800) 626-4686 for full Limited Warranty details and restrictions.
|
For quantity discount price, please contact PLPC at 626-965-8686.
Or email us use our webbase contact form. |
|
|